Atividade

  • zhenhan publicou uma atualização 2 meses atrás

    This product is designed for the cleaning of slag which are generated in the smelting and holding furnaces during the metal smelting process.
    HNBZ8512 is a multipurpose wheel type telescopic slagging truck, with three-section telescopic boom, the maximum lifting height 3200mm, the slag power is biggerr than 10KN, the maximum extension distance 8500mm, all the slag action is operated through hydraulic pilot. It is very suitable for smelting furnace and holding furnace slag, stirring and clearing furnace.
    1, Adpot Donefeng CUMMINS turbocharge diesel engine, China stage III emissions, power strong, energy saving and environmental protection, meet the efficient working requirements.
    2, Adpot fixed – shaft type hydraulic transmission, the traction force of the combined condition is large, and the double-variable system is more reliable. Twin-turbo hydraulic torque converter stepless speed change; single-lever control transmission system, two forward and two backward gear shift, operation is easier.
    3, Adopt dual-pump confluence working hydraulic system, a significant reduction in fuel consumption and energy consumption.
    4, Adopt full hydraulic coaxial flow amplification steering system, the turning radius of rear axle is small, steering light and flexible.
    5, Adopt front wheel drive, rigid suspension, rear axle steering structure. The front axle spiral bevel gear and the wheel side planetary gear increase toqrue, big load capacity. The rear axle adopts the transverse hydraulic cylinder type steering mechanism, which is helpful to reduce the steering resistance, reduce the tire wear and improve the ride comfort.
    PerformanceSpecifications
    Basic parameterOverall width(The boom is fully retracted)7100 mm
    Basic boom length4490 mm
    Max. boom length(Fully extended)13000 mm
    Width2340 mm
    HeightCab height2360 mm
    Height when the boom fully extended3200 mm
    Min. ground clearance160 mm
    Max. extension8600 mm
    Min. extension2600 mm
    Wheelbase3000 mm
    Wheel treadFront1640 mm
    Rear1630 mm
    Min. outside turning radius≤105%7000 mm
    Approach angle20 °
    Departure angle15 °
    Range elevationMax. elevation angle of boom7 °
    Min. elevation angle of boom-12 °
    Truck weight11000 kg
    Slag removing forceLevel≥90%10 kN
    Vertical≥90%10 kN
    EngineModelQSB3.9-C100-31
    Rated power/rotate speed74kW/2400 rpm
    Max. torque/rotate speed330N.m/1400~1600 rpm
    Transmission systemTransmission wayPower shift, fixed-axis type, hydraulic transmission
    Gear (forward / backward)2月2日
    Max. travelling speed28km/h
    Max. drawbar pull≥90%30kN
    Gradeability15%
    Oil tank capacityHydraulic oil tank capacity230L
    Fuel oil tank capacity230L
    Brake systemParking brakeHand expanding shoe type brake
    Service brakeGas cap oil brake
    Brake system air pressure0.684-0.785 MPa
    Hydraulic systemHydraulic system pressure18MPa
    Joystick system pressure0.30MPa
    Extend / retract speed1150/1100 mm/s
    Up / down speed3/3°/s
    Steering systemSteering typeFully hydraulic load sensing steering system
    System pressure14MPa
    TyreFront tyre (front tyre 4, solid tyres)8-20
    Rear tyre (rear tyre 2, solid tyres)8-20Customized Furnace-tending Vehicle
    website:http://www.socma-forklift.com/furnace-tending-vehicle/